Security Camera World SCW-7709 Manual de Instruções

- 1 - SCW-7709 & SCW-7716 Users ManualSCW-7709 & SCW-7716 Users Manual

- 10 - 19. Up/BS Button (▲/BS) Press this button to move the cursor or focus window in most circumstances. In PTZ control, press this button to

- 11 - 2.2 Back Panel 1. Video Input Connectors (1-16/1-9) Connect system cameras to these BNC connectors. The corresponding 75Ω termi

- 12 - 9. CALL-AUX Connectors (CALL-AUX IN/OUT) Used to daisy-chain to TV monitor. CALL-AUX OUT has the same output as CALL OUT, but can be swi

- 13 - 21. VGA Connector (optional) Connect VGA monitor to the VGA connector for main monitor display. 22. Remote sensor connector (optional) Besi

- 14 - 3. Installations The installations described below should be made by qualified service personnel or system installers. 3.1 Basic Connectio

- 15 - Note 2: Each of the HDDs must be formatted before it can be used to record video/audio. Please refer to Section 6.6.1 HDD Format/Clear to

- 16 -  USB 2.0 disk drives, DVD+RW, card reader, etc. If the user wants to use USB2.0 peripheral device to retrieve important recorded images an

- 17 - For 4-line devices (such as keyboard) DVR Devices For PTZ cameras DVR De

- 18 -  CALL-AUX monitor Please refer to the diagram below to connect the CALL-AUX monitor output connector to a surveillance TV monitor or the

- 19 - 4. Main Screen And Basic Operations The split-window screen, as shown above, is the main screen after system startup. There are several

- 2 -CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. PLEASE REFER SERVICING TO QUALIFIED SERVICE

- 20 - 4.1 Text Input There are certain circumstances that the system requires the user to enter text, such as system login, camera title setup, a

- 21 - The Operator can operate live video display, the Supervisor live video display, image playback and archive, and the Administrator everything

- 22 -  SEQ Press this button to switch to or return from SEQ display mode. In SEQ display mode, each page in the sequence will be shown for t

- 23 - 4.4 Digital Zoom The system supports X2/X4 Digital Zoom function. To use this function, press X2 button in full screen display to ente

- 24 - 5. Menu Display In split-window display, press MENU to call up Menu display as shown. There are a variety of displays under Menu display.

- 25 - 5.1 Status Display In Menu display, press ▲▼ to change the highlighted option to Status, and then press ENTER to call up Status display as

- 26 - Following is a brief description for each item and its specific operations:  Mute – to mute the selected audio channel. Press ENTER or +

- 27 -  SEQ Press this button to reset the settings for this camera to factory default values.  CALL Press this button to reset the settings f

- 28 -  ESC Press this button to escape from this screen, and return to Menu display. If the contents have been modified, a Save dialog will b

- 29 -  Connect/Disconnect – If the specific backup device is disconnected (as shown in Current Status), please plug the USB device in one of the

- 3 -LIMITATION OF LIABILITY  THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMI

- 30 - DVD Writer – Asus DRW-1608P Series, Pioneer DVR-A11 Series. LITEON LightScribe DVD Writer Model SHM-165H6S Series. Sony DVD/CD Rewritable Dr

- 31 -  Disk Storage – to select the disk storage to upgrade. Press +/- buttons to select the available storage.  Upgrade File – press ENTE

- 32 - 6. Setup (Administrator) In Menu display, press ▲▼ to change the highlighted option to Setup, and then press ENTER to call up Setup Menu di

- 33 - 6.1 Pre-Camera Setup In Setup Menu display, press ▲▼ to change the highlighted option to Pre-Camera, and then press ENTER to call up Pre-Ca

- 34 -  Installed – whether this camera is installed or not. If installed, the following items will be settable. Press ENTER or +/- to check/u

- 35 - 6.2 Camera Setup In Setup Menu display, press ▲▼ to change the highlighted option to Camera, and then press ENTER to call up Camera Setup d

- 36 - Following is a brief description for each item and its specific operations:  Title – The title (Max. 8 characters) of this camera. Pleas

- 37 -  Pre-record IPS – the pre-record IPS for this camera if certain event (Video Loss, Motion, Alarm) occurs for this camera. This camera i

- 38 - Following is a brief description for each item and its specific operations:  Duration – response duration to define at most how long (in

- 39 - The general operations are as below:  ▲▼◄► Press these buttons to select the items.  Numeric (ENTER) Press these buttons to select t

- 4 -PRECAUTIONS  Please refer all work related to the installation of this product to qualified service personnel or system installers.  Do not

- 40 -  Pre-record – to define how long before motion is detected this camera shall be intensively recorded at Pre-record IPS. Press +/- buttons

- 41 - Following is a brief description for the operations:  Numeric Press these buttons to select the camera.  ▲▼◄► Press these buttons to

- 42 -  ESC Press this button to escape from Motion Detection Setup, and return to Motion Setup. 6.3 Alarm Setup In Setup Menu display, press

- 43 - Following is a brief description for each item and its specific operations:  Normal State – press +/- buttons to select N/A, Close or Op

- 44 - 6.4 SEQ Display Setup In Setup Menu display, press ▲▼ to change the highlighted option to SEQ Display, and then press ENTER to call up SEQ

- 45 - In Display Page Setup, the split window display for the current page is shown. And the title of the camera for the focus window is highli

- 46 - 6.5 Scheduled Record Setup In Setup Menu display, press ▲▼ to change the highlighted option to Scheduled Record, and then press ENTER to ca

- 47 - Example: If the user sets the start time of T1/MON as 9:00, T2/MON as 18:00, T3-T16/MON as N/A (Not Available), then T1/MON is 9:00-18:00, T

- 48 - The general operations are as below:  ▲▼◄► Press these buttons to select the items.  MODE => Format/Clear Press this button to form

- 49 -  E-mail – to send the event e-mail to remote station or not. The e-mail will be sent to the predefined receivers when the event is trig

- 5 -Table of Contents 1. Product Overview………………….……………………….……... 1.1 Features…………………..…….…………..…………………... 2. Panels And Remote Controller…………...……

- 50 -  SEQ => Clear Press this button to clear the selected HDD. A confirmation dialog will be shown on the screen, press ENTER to confirm,

- 51 - 6.7 Password Setup In Setup Menu display, press ▲▼ to change the highlighted option to Password, and then press ENTER to call up Password S

- 52 - Following is a brief description for each item and its specific operations:  Login Name – please follow the Text Input method described i

- 53 -  ESC Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to exit a

- 54 - 6.9 RS-232/422/485 Setup In Setup Menu display, press ▲▼ to change the highlighted option to RS-232/422/485, and then press ENTER to call u

- 55 - 6.10 Network Setup In Setup Menu display, press ▲▼ to change the highlighted option to Network, and then press ENTER to call up Network Set

- 56 -  Gateway – Gateway IP address for the system. Please follow the Text Input method described in Section 4.1 to modify these items.  DN

- 57 - 6.10.1 E-mail Setup In Network Setup, press ENTER to call up E-mail Setup as shown when the highlighted option is E-mail. The E-mail Set

- 58 -  Password – password if the SMTP mail server requires authentication. Please follow the Text Input method described in Section 4.1 to

- 59 -  HTTP Port – the HTTP (web page) port for remote access. The default value is 80. Please follow the Text Input method described in S

- 6 - 6.10.2 Advanced Network Setup……………..………………… 7. PTZ Control……………………….……………………………… 8. Search/Playback/Archive (Administrator/Supervisor) ……….

- 60 -  NEXT Press this button for the next miscellaneous function. The miscellaneous functions include Focus, Iris, Auto PAN, SEQ, Preset, and

- 61 - 8. Search/Playback/Archive (Administrator, Supervisor) There are five ways to search the recorded video/audio for playback: (a) Search by t

- 62 - The general operations are as below:  ▲▼ Press these buttons to select the items.  ESC Press this button to escape from this screen, a

- 63 - 8.2 Search By Event / Log Display The screen for Search By Event - Log display, is shown below: There are four different types of event

- 64 - Following is a brief description for each item and its specific operations:  Event Type – the type of the events (Record, Alarm, Motion

- 65 - The operations are as below:  ▲▼◄► Press these buttons to select the items.  ESC Press this button to escape from this screen, and ret

- 66 -  Stop Button ( ) Press this button to stop playing the recorded video/audio. If the user press button later, the playback will start f

- 67 - Note: For internal DVD, please open the front door in order not to block the tray from ejecting, esp. while it’s in backup process. Bloc

- 68 - 8.5 Playback/Archive For Search By Event In Log display, press ENTER to enter Event Playback display of the selected event log, or press Pl

- 69 - 8.7 Playback For Archived Files In Search Archived Files display, press ENTER to enter Archived File Playback display of the selected file,

- 7 - 1. Product Overview The H.264 digital video/audio recorders are designed for use within a surveillance system and are a combination of a har

- 70 - 4. The domain name or IP address of the digital video/audio recorder has been set as trusted web site in your PC, and the (https:) server ve

- 71 - The video images can be displayed in several types of split-window screens, including 1/4/9/16-Window for single DVR and 25/36/49/64 for m

- 72 - Click on this icon to switch to or return from SEQ display mode. Click on this icon to toggle between live mode and playback mode for

- 73 - Click on these icons to switch to the selected DVR, button down for selected. The 1/4/9/16 split-window video display, the camera statu

- 74 - Alarm Out / Alarm outputs 1-4 (GREEN for normal state, RED for triggered state) for the selected DVR. For Administrator, click on any

- 75 -  Device Name – any meaningful name for the (DVR) device.  Address – IP address or URL domain name for the (DVR) device. It should be

- 76 - System Requirements of Remote PC It is recommended to access the digital video/audio recorder using a PC that meets the following system re

- 77 - Appendix A – Specifications O.S. Embedded Linux 2.6 Multiplex Sixfold operation - simultaneous record, live, playback, backup, control, &am

- 78 - Internal DVD models: DVD+RW, DVD+R, DVD-RInput 16 contact or TTL/CMOS signal, polarity selectable Output 2 Normally Open, 2 Normally Close

- 79 - Appendix B – Structures Of Menu Displays SCW-7709 & SCW-7716 Users ManualSCW-7709 & SCW-7716 Users Manual

- 8 - 2. Panels and Remote Controller 2.1 Front Panel 1. Front Door Conceal Hard Disk Tray (and internal DVD for DVD models), Reset Button, U

- 80 - Appendix C – Time Zone Table Time Zone Offset DST Start End Samoa GMT – 11:00 Hawaii GMT – 10:00 Alaska GMT – 09:00

- 81 - Time Zone Offset DST Start End Kabul GMT + 04:30 Ekaterinburg GMT + 05:00 Mar, last Sun, 2:00 Oct, last Sun, 3:00Islamabad,

- 82 - Appendix D – Keyboard Control Protocol Data Format 5 Bytes – Byte 1 : Synchronization Byte (0xFF) Byte 2 : Address, i.e. Device ID (0 – 0xF

- 83 - CALL-AUX ON 0x5b (ASCII character ‘[’) CALL-AUX OFF 0x5d (ASCII character ‘]’) UP-LEFT 0x7b (ASCII character ‘{’) DOWN-LEFT 0x7c (ASCII

- 84 - Appendix E – Recording Table NTSC Recording Time (in Hour) - For Reference Only System Storage (GB): 200 Average Recording Rate (IPS) Reso

- 85 - PAL Recording Time (in Hour) - For Reference Only System Storage (GB): 200 Average Recording Rate (IPS) Resolution QualityPicture Size (KB)

- 86 - Appendix F – MS-Windows HEM Utilities There are several MS-Windows utility programs in the bundled CD, including DP-9010, HEM Player, Keybo

- 87 - type if it’s on those enabled function icons. The operations and their descriptions are the same as in Chapter 9. Remote Access. To sele

- 88 - Keyboard Control Simulator To run the Keyboard Control Simulator under MS-Windows, please select Start->Programs->Hyper Electronics M

- 89 - M4V/H.264 to AVI Conversion Utility To run the M4V/H.264 to AVI Conversion Utility under MS-Windows, please select Start->Programs->H

- 9 - 8. SEARCH Button Press this button to display the search menu in main screen display. In some dialogs, this button is used as a miscellan